should you trim cedar trees

Should You Trim Cedar Trees?

Table of Contents
    Add a header to begin generating the table of contents

    As they age, cedar trees can become difficult to chop due to their height (80 feet or more). Don't risk injury by attempting to cut down a tree that's too high up with a ladder — instead, get a professional service to do it. Never trim a tall tree with a ladder perched on an unstable surface or near a power line.

    Intense annual pruning to remove all new growth is required to successfully prune a tall-growing cedar tree into a shrub. The necessary pruning to maintain a reduced size may significantly degrade the form and aesthetic appeal of the original.

    The calendar has already flipped to July, and now that spring has arrived, it will inevitably heat up. Now that the pool is up and running, all that's left to do is a little cedar trimming.

    Before beginning your annual cedar pruning, you should understand why such maintenance is required. Hedge height restrictions on cedar plants are enforced in some communities.

    Additionally, cedar is a fast-growing conifer. When planting a hedge for privacy, it's best to keep it at a manageable height and density. When, though, should you prune your hedge for maximum effect?

    Young cedars will develop rapidly if pruned in the spring, as this is the optimal time to stimulate development. Mature trees benefit from a trim at the conclusion of the growing season to keep their healthy growth.

    Midway through June until the end of This month is the ideal time to perform the initial cutting. At the point where around 10 centimetres of fresh growth has appeared, you must move forwards. The new growth is easily distinguishable thanks to its lighter green colour compared to a darker foliage of earlier years.

    If you want a branch which will bloom again, you should prune it back by as much as two-thirds, stopping just short of the brown area where new leaves won't sprout.

    Further, if you trim your cedar overly short, you won't have enough room to mould the foliage into a cone or a pyramid. Because of the buildup of snow in the winter, it is best to avoid cutting your hedge into a rectangular shape. You risk crushing and cracking your cedars.

    In what way would you need to cut something twice? Faster and denser growth of new foliage is achieved through regular pruning twice yearly. The density is doubled with each pass of the trimmer. However, a good-looking cedar can usually be obtained with only one pruning.

    It's best to avoid pruning during extreme heat or strong sunlight, as this might cause the branches to dry up and die.

    The proper way to trim cedars if you've never done it before

    If you've let your cedars go for a while without trimming them, the foliage will be concentrated towards the tips of the branches, leaving gaps in your hedge.

    As soon as you've finished pruning your cedars, apply an excessive amount of a water-soluble fertiliser such as 30-10-10 to encourage new growth and repopulate your hedge. Up until July 15th, you can fertilise your plants three times, and once every three days. We don't see why you'd want to get up thus The cedar's growth rate drops dramatically after that date, as it begins to prepare for hibernation. Fertilizing in direct sunlight can cause cedars to char.

    If you over-fertilize your hedge, you can also perform double pruning, which may prove quite beneficial by allowing the hedge to regenerate.

    The overfertilisation, if that wasn't enough.

    The only option now is to have fresh cedars planted. Although spring is the best time to grow cedars, you can do it in any season. Nonetheless, we need to regularly and thoroughly hydrate the soil to ensure its viability.

    Our Cedar Trees Need Trimming

    We don't have a lot of trees on our site, and they're expensive. The cedars in front of our land needed trimming, but I'm not yet ready to remove any further trees. The purpose of acquiring a zero-turn mower was so that it could be used to cut grass around the tree.

    First, we will mow as near to the trunks of the cedars as possible, allowing us to use the push weedwacker to penetrate the low branches. The two-step procedure is not only cumbersome, but also quite time-consuming.

    Our biggest cedar tree was felled last year. Another tree was growing in and around it, and its placement was peculiar. At some point in the future, we'll still need to grind out the old stump. Along an abandoned barbed wire fence is where you'll find the last of the cedar trees.

    They don't go all the way to the property line as we'd want, but they do make a nice, natural divider there. At this time, We think it's advisable to prune the cedars.

    trim cedar trees

    How We Cut Our Cedar Trees

    We started by trying to use a tiny chainsaw, but quickly realised that this method would take far too long. The Husqvarna 435 40cc 2-cycle 16in Gas Chainsaw was a neighbor's tool that we were able to borrow. To get started, hand him the branch wanted cut. Then drag it into the way while he did the cutting. This is how we circumnavigated the tree. It was possible to find some fascinating patterns in the branching structures. Multiple times we had to take a step back to assess whether or not a branch needed to be removed.

    Put things in perspective. When you remove a branch from a tree, it's gone for good, and the tree may look unsightly as a result. Cutting cedar trees will not encourage new growth where you removed a limb.

    You should start arranging your cuts after the branches have been trimmed to around shoulder height. Grab a limb and wiggle it as far out of way as you can to picture the tree without it.

    You may need to take a few steps back and look at the which further to ensure you're happy with the form you're creating as you make your cuts.

    A cedar tree is easily recognised by its pyramidal form and needle-like branches that can grow to a diameter of five feet or more. Pruning its lengthy branches and performing deep root work are two of this evergreen's few particular care requirements.

    Pruning the branches of your cedar tree is an important part of tree maintenance. Leave the healthy branches close to the trunk, but cut away the dead ones.

    For the sake of your home, you should cut away any branches that are touching a wall or roof.

    It's important to maintain the soil moist all through the year, so be sure to water it regularly. If you want to plant a tree in the ground, you should prepare the hole by digging it to a depth of 12 inches in early fall, setting the tree in the hole, and then filling in the soil around it. It needs a lot of water.

    This will ensure that it has access to water throughout the winter, even in areas where snow is scarce. Cedar trees benefit from early-spring pruning, before new growth begins. Do this annually to encourage proper development.

    Don't rush into hiring a tree service if you don't have a significant amount of time to devote to pruning your cedar tree. To maintain cedar trees, most landscaping businesses charge a yearly fee for services like pruning and watering.

    Tips For Trimming Cedar Trees

    Some advice on cedar tree pruning:

    • You'll need a saw, loppers , shears, and a ladder, so get those ready first.
    • Put the ladder against the top of the tree's trunk and climb it on your knees. Make sure you lean over the tree with both feet firmly planted on the ground to ensure your balance.
    • After that, get out your or saw loppers and remove any branches that are touching or near a power line.
    • Last but not least, shear "dry" branches.
    • Be careful when chopping dry branches, since you could easily injure yourself. Don't sever any cables without proper safety precautions.

    Aesthetics are the primary focus of tree trimming. Thin off dead or diseased branches to keep your trees healthy and looking their best. Without proper care, cedars can become invasive and cause your trees to look untamed and out of control. If you let your tree's branches grow unchecked, they may eventually touch your neighbor's land or get too close to overhead lines, posing a risk to you and your home.

    Your Seattle cedar trees may not be in the best of shape if they've been allowed to grow too rapidly. Having too many branches can cut down on the amount of water and sunlight your cedars get, which can cause them to dry out and eventually die.

    If you want to reduce the amount of stress you put on your cedar trees, trim them in the late winter or early spring, when they are dormant. This will allow them to fully recuperate in time for the next growing season.

    Frequently Asked Questions About Tree

    Pruning is used to remove unnecessary branches. Trimming, on the other hand, promotes healthy growth. Both services are performed at separate times of the year, using vastly different pieces of equipment, to provide a better aesthetic and healthier landscape. Understanding the difference, though, is crucial.

    If less than 25% of the bark around the trunk has been damaged, the tree will probably recover. When fresh wounds occur on the trunk, the injured bark should be removed carefully, leaving healthy bark that is sound and tight to the wood. A wound dressing (tree paint) is not necessary.

    Pruning sealers, also called pruning paint, are products that claim to “aid the healing of pruning cuts” or “minimise sap loss.” Most often, these products are petroleum-based, but some even contain asphalt. Alternatively, there are natural tree sealers with ingredients like collagen and aloe gel.

    What finally kills the tree? Answer: The tree is finally killed by pulling out of the mother earth. When its roots are exposed to sunlight and air, the tree begins to get scorched and choked.

    After pruning, you may apply a fertilizer to encourage vigorous new growth. I must admit this takes a strong will. Your plants will likely be blooming when you cut them back and will certainly not look their best immediately after the procedure. In many instances, though, it is well worth the down time.

    When Should Cedar Bushes And Trees Be Trimmed?

    The Gardener's Network claims that cedars, commonly known as cedar bushes & shrubs, are actually trees. The reddish, fragrant wood and the square, cracked or thick, textured bark are their distinctive features. As evergreens that require little care and have dense foliage, they are among the top choices for screening trees.

    Cedar Tree Pruning

    A cedar tree requires little maintenance once it has established in its environment. You won't have to spend a tonne of effort maintaining their appearance. You only need to trim them yearly, between the last week of June and the first week of July; a blogger at Botanix recommends the period between June 20 and August for this task. Make sure to get it done before the cedar begins producing new growth, though.

    Wearing protective gloves, prune away any dead wood using your bare hands or sharp pruning shears. The remaining branches should be lopped off vertically. If you observe fresh growth, or a "green line," stop cutting there. In order to maintain a healthy branch structure, you should leave at least two inches of the green stuff. If you must remove entire limbs, do so as near to the trunk as possible.

    More Cedar Tree Details

    If indeed the cedar is no older than a few years, you should merely cut back its sides. Maintaining a cone form, with the base larger than the crown, allows sunlight to reach the lower branches and provides shelter from deep snowfall. Once your mature cedar tree has reached the desired height, you can trim the top, but be sure to leave it rounded. In addition, you should note that cedar trees can't produce new growth on old wood.

    The experts at Trees have identified four species of "genuine" cedar trees, each of which has the potential to reach great heights. The Cyprian Cedar (Cedrus Brevifolia) is the smallest of the three and can reach heights of 80 feet; its dark, blue-green leaves can be grown in USDA plant hardiness zones 6 to 8. The Atlas Cedar (Cedrus atlantica) grows to a maximum height of 115 feet in USDA plant weather zones 6 through 9, whereas the Cedar (Cedrus libani) grows to a maximum height of 130 feet in USDA plant weather zones 5 through 9.

    Deodar Cedar (Cedrus deodara, USDA plant hardiness zones 7 through 11) is the tallest of the bunch at 160 ft., but cedars naturally attain considerably greater heights in the western Himalayan ranges and the Mediterranean.

    trim cedar trees (2)

    Cedar Tree Planting

    C-I-L Lawn and Garden recommends planting cedar trees in the early spring once the ground has thawed. First, add some shrub natural food to the soil in advance, and afterwards dig a hole that's just a little deeper and wider than the root ball. The tree should be centred, with the top of root ball resting on the soil's surface. Fill up the gaps with soil and pack it down tightly to eliminate air pockets. The tree will have a better chance at survival if you add some new dirt or compost while planting it.

    Watering new cedar trees requires digging a small trench surrounding it and then watering it slowly each week for around an hour. At night, use a soaker hose to accomplish this. If it hasn't rained in a week or so, you might want to up this. In the second year, fertilise the tree sapling once in early May.

    When Is The Best Time To Prune Cedar Trees?

    You should trim your cedar tree in the fall if you have one in your yard. This will lessen the likelihood of insect infestation and sap seepage.

    If you don't, they might start making sap, which could flow over your doors and windows during winter storms.

    Take care of any necessary pruning with pliers or shears right before the first frost. Keep some foliage here on branches to shield them from pests. Then, spread a thick layer of mulch around the trunk to keep the roots warm and safe from the winter's chill.

    The use of sharp implements is recommended. Take care if you decide to hack through the bark. Cut along the tree's natural curves and in a perpendicular direction to the ground.

    If you want to discourage insect infestation, avoid cutting branches so low that they touch the ground. Covering branches wit shade netting or another material is another option for giving them some relief from the sun.

    To protect a huge tree from damage throughout the colder months of winter and early spring, it is recommended that you leave all of its limbs with their leaf intact. In this way, lawnmowers and weed wackers can do their jobs more efficiently (never haul your leaf-blower around during cold spells).

    Pruning To Keep A Natural Shape

    The single cedar that was there when we acquired the house over fifteen years ago, when it was just four feet tall, is now at least twenty feet tall. By regularly cutting it back in some way that preserves its natural form, prevented it from overtaking the route next to it. We don't want it to end up looking like a topiary but more like a cedar tree, in the traditional pyramid or Christmas tree shape.

    To achieve this, make angled cuts back to the point where a branch meets another, much as you would when pruning a deciduous tree, to remove any unnecessary fullness.

    We know of no other way to prune a tree without drastically altering its natural form, but this method is far more time-consuming than simply shearing off everything like you're using a lawnmower.

    Making A Formal Hedge from Cedars

    been steadily turning the cedars eventually put into a thick wall of greens along the back fence in an effort to conceal the wire fence and not-so-lovely garage behind me after constantly scolding myself for not having done so years before.

    This was the sight inyard last weekend. You see the original three cedars that began shaping a few years ago on the left, and the three younger cedars on the right, which waited to grow to a reasonable height before beginning to trim. There's also a solitary column juniper ahead of the cedars. For those of you who are just now discovering my blog, the wooden house in the photo is part of tomato safety net.

    Getting a ladder close enough to these cedars to cut their tops is easiest when the soil is frozen because they grow along the border of vegetable plot. Even in the dead of winter, there are often a few mild days where can spend an hour or two outside and almost pretend that gardening again.

    For a formal hedge to appear its best, it's crucial that the trees' crowns are roughly even. We doubt be able to do this by eye, especially because Have to be perched on a ladder to check its verticality.

    To keep track of where  cuts should be made, We use a line on a stick that prop up against the back fence. The same might be done by measuring from the bottom up with a long stick or even a tape measure if the ground your trees are planted in is flat.

    Using the guideline on the stick, We chopped through the branch of the tree.

    Conclusion

    Intense annual pruning to remove all new growth is required to successfully prune a tall-growing cedar tree into a shrub. As they age, cedar trees can become difficult to chop due to their height (80 feet or more). Don't risk injury by attempting to cut down a tree that's too high up with a ladder — instead, get a professional service to do it. If you've let your cedars go for a while without trimming them, the foliage will be concentrated towards the tips of the branches, leaving gaps in your hedge. It's best to avoid pruning during extreme heat or strong sunlight, as this might cause the branches to dry up and die.

    If you over-fertilize your hedge, you can also perform double pruning. A cedar tree is easily recognised by its pyramidal form and needle-like branches that can grow to a diameter of five feet or more. Pruning its lengthy branches and performing deep root work are two of this evergreen's few particular care requirements. The Husqvarna 435 40cc 2-cycle 16in Gas Chainsaw was a neighbor's tool that we were able to borrow. It's important to maintain the soil moist all through the year, so be sure to water it regularly.

    Cedar trees benefit from early-spring pruning, before new growth begins. If you let your tree's branches grow unchecked, they may eventually touch your neighbor's land or get too close to overhead lines. If you want to reduce the amount of stress you put on your cedar trees, trim them in the late winter or early spring. The reddish, fragrant wood and the square, cracked or thick, textured bark are their distinctive features. As evergreens that require little care and have dense foliage, they are among the top choices for screening trees.

    The Cyprian Cedar (Cedrus Brevifolia) is the smallest of the three and can reach heights of 80 feet. The Atlas Cedar grows to a maximum height of 115 feet in USDA plant weather zones 6 through 9. The Deodar Cedar is the tallest of the bunch at 160 ft., but cedars naturally attain greater heights in the western Himalayan ranges and the Mediterranean. If you're planning to prune a large tree, it is important to leave all of its limbs with their leaf intact. Cut along the tree's natural curves and in a perpendicular direction to the ground.

    Avoid cutting branches so low that they touch the ground to discourage insect infestation. Covering branches wit shade netting or another material is another option for giving them some relief from the sun. For a formal hedge to appear its best, it's crucial that the crowns are roughly even. We doubt be able to do this by eye, especially because we Have to be perched on a ladder to check its verticality. To keep track of where  cuts should be made, We use a line on a stick that prop up against the back fence.

    Content Summary:

    • As they age, cedar trees can become difficult to chop due to their height (80 feet or more).
    • Don't risk injury by attempting to cut down a tree that's too high up with a ladder — instead, get a professional service to do it.
    • Never trim a tall tree with a ladder perched on an unstable surface or near a power line.
    • Intense annual pruning to remove all new growth is required to successfully prune a tall-growing cedar tree into a shrub.
    • Before beginning your annual cedar pruning, you should understand why such maintenance is required.
    • Additionally, cedar is a fast-growing conifer.
    • When planting a hedge for privacy, it's best to keep it at a manageable height and density.
    • When, though, should you prune your hedge for maximum effect?Young cedars will develop rapidly if pruned in the spring, as this is the optimal time to stimulate development.
    • Mature trees benefit from a trim at the conclusion of the growing season to keep their healthy growth.
    • Midway through June until the end of This month is the ideal time to perform the initial cutting.
    • Further, if you trim your cedar overly short, you won't have enough room to mould the foliage into a cone or a pyramid.
    • Because of the buildup of snow in the winter, it is best to avoid cutting your hedge into a rectangular shape.
    • In what way would you need to cut something twice?
    • Faster and denser growth of new foliage is achieved through regular pruning twice yearly.
    • The density is doubled with each pass of the trimmer.
    • The proper way to trim cedars if you've never done it beforeIf you've let your cedars go for a while without trimming them, the foliage will be concentrated towards the tips of the branches, leaving gaps in your hedge.
    • As soon as you've finished pruning your cedars, apply an excessive amount of a water-soluble fertiliser such as 30-10-10 to encourage new growth and repopulate your hedge.
    • Up until July 15th, you can fertilise your plants three times, and once every three days.
    • If you over-fertilize your hedge, you can also perform double pruning, which may prove quite beneficial by allowing the hedge to regenerate.
    • The only option now is to have fresh cedars planted.
    • Although spring is the best time to grow cedars, you can do it in any season.
    • The purpose of acquiring a zero-turn mower was so that it could be used to cut grass around the tree.
    • First, we will mow as near to the trunks of the cedars as possible, allowing us to use the push weedwacker to penetrate the low branches.
    • They don't go all the way to the property line as we'd want, but they do make a nice, natural divider there.
    • At this time, We think it's advisable to prune the cedars.trim cedar trees
    • We started by trying to use a tiny chainsaw, but quickly realised that this method would take far too long.
    • To get started, hand him the branch wanted cut.
    • This is how we circumnavigated the tree.
    • It was possible to find some fascinating patterns in the branching structures.
    • Multiple times we had to take a step back to assess whether or not a branch needed to be removed.
    • When you remove a branch from a tree, it's gone for good, and the tree may look unsightly as a result.
    • Cutting cedar trees will not encourage new growth where you removed a limb.
    • You should start arranging your cuts after the branches have been trimmed to around shoulder height.
    • Grab a limb and wiggle it as far out of way as you can to picture the tree without it.
    • A cedar tree is easily recognised by its pyramidal form and needle-like branches that can grow to a diameter of five feet or more.
    • Pruning the branches of your cedar tree is an important part of tree maintenance.
    • Leave the healthy branches close to the trunk, but cut away the dead ones.
    • For the sake of your home, you should cut away any branches that are touching a wall or roof.
    • It's important to maintain the soil moist all through the year, so be sure to water it regularly.
    • If you want to plant a tree in the ground, you should prepare the hole by digging it to a depth of 12 inches in early fall, setting the tree in the hole, and then filling in the soil around it.
    • It needs a lot of water.
    • Cedar trees benefit from early-spring pruning, before new growth begins.
    • Don't rush into hiring a tree service if you don't have a significant amount of time to devote to pruning your cedar tree.
    • Some advice on cedar tree pruning:You'll need a saw, loppers , shears, and a ladder, so get those ready first.
    • Last but not least, shear "dry" branches.
    • Aesthetics are the primary focus of tree trimming.
    • Thin off dead or diseased branches to keep your trees healthy and looking their best.
    • Without proper care, cedars can become invasive and cause your trees to look untamed and out of control.
    • Your Seattle cedar trees may not be in the best of shape if they've been allowed to grow too rapidly.
    • Having too many branches can cut down on the amount of water and sunlight your cedars get, which can cause them to dry out and eventually die.
    • If you want to reduce the amount of stress you put on your cedar trees, trim them in the late winter or early spring, when they are dormant.
    • This will allow them to fully recuperate in time for the next growing season.
    • The Gardener's Network claims that cedars, commonly known as cedar bushes & shrubs, are actually trees.
    • A cedar tree requires little maintenance once it has established in its environment.
    • Make sure to get it done before the cedar begins producing new growth, though.
    • If indeed the cedar is no older than a few years, you should merely cut back its sides.
    • Once your mature cedar tree has reached the desired height, you can trim the top, but be sure to leave it rounded.
    • In addition, you should note that cedar trees can't produce new growth on old wood.
    • The experts at Trees have identified four species of "genuine" cedar trees, each of which has the potential to reach great heights.
    • The Cyprian Cedar (Cedrus Brevifolia) is the smallest of the three and can reach heights of 80 feet; its dark, blue-green leaves can be grown in USDA plant hardiness zones 6 to 8.
    • But cedars naturally attain considerably greater heights in the western Himalayan ranges and the Mediterranean.
    • Watering new cedar trees requires digging a small trench surrounding it and then watering it slowly each week for around an hour.
    • You should trim your cedar tree in the fall if you have one in your yard.
    • The use of sharp implements is recommended.
    • Take care if you decide to hack through the bark.
    • Cut along the tree's natural curves and in a perpendicular direction to the ground.
    • If you want to discourage insect infestation, avoid cutting branches so low that they touch the ground.
    • To protect a huge tree from damage throughout the colder months of winter and early spring, it is recommended that you leave all of its limbs with their leaf intact.
    • By regularly cutting it back in some way that preserves its natural form, prevented it from overtaking the route next to it.
    • We don't want it to end up looking like a topiary but more like a cedar tree, in the traditional pyramid or Christmas tree shape.
    • We know of no other way to prune a tree without drastically altering its natural form, but this method is far more time-consuming than simply shearing off everything like you're using a lawnmower.
    • Been steadily turning the cedars eventually put into a thick wall of greens along the back fence in an effort to conceal the wire fence and not-so-lovely garage behind me after constantly scolding myself for not having done so years before.
    • This was the sight inyard last weekend.
    • You see the original three cedars that began shaping a few years ago on the left, and the three younger cedars on the right, which waited to grow to a reasonable height before beginning to trim.
    • There's also a solitary column juniper ahead of the cedars.
    • For those of you who are just now discovering my blog, the wooden house in the photo is part of a tomato safety net.
    • Getting a ladder close enough to these cedars to cut their tops is easiest when the soil is frozen because they grow along the border of vegetable plot.
    • For a formal hedge to appear its best, it's crucial that the trees' crowns are roughly even.
    • To keep track of where  cuts should be made, We use a line on a stick that prop up against the back fence.
    • The same might be done by measuring from the bottom up with a long stick or even a tape measure if the ground your trees are planted in is flat.
    • Using the guideline on the stick, We chopped through the branch of the tree.
    Scroll to Top